External Pause Option

External Pause Option

simple, seamless integration

The External Pause Option allows for simple, seamless integration to a wide range of external devices, configuring to print a single label at a time, multiple labels or the entire print job. QuickLabel’s module provides the functionality necessary to fill a loose loop and eliminate the need for costly, time-consuming control system programming.

This pre- programmed module eliminates of the need to learn and program in the printer’s control language.

Additional Benefits:

  • Monitor status of printer activity or error messages on the LCD display
  • Trigger your label printer to produce batches of labels, pause, or stop the batch all together
  • Connect external signaling devices such as a light pole or audible alert
  • “High Speed” mode for applications where higher throughput is required
  • One Year Warranty, fully supported and guaranteed to work with QuickLabel label printers

Perfect for: e-juice manufacturers, chemical and medical device manufacturers and more.


  • Display — (2×16) alphanumeric, backlit LCD
  • External Controls — Manual Pushbutton for Activation and Boot Control
  • Internal Controls — 8-position DIP switch for print mode control, print quantity upon trigger and initiate printhead cleaning (high speed mode only)Jumpers for selection of internal/external 3.3V or 5V logic or external Vin (max. 24VDC)
  • Interfaces — QuickLabel Printers
    • RS232 Serial Port, 9-pin Female D-Shell connector 6’ (1.8m) Serial Cable included

Hardware I/O

  • Quick disconnect, locking 10-pin header connector
  • (3) N.O. Relay Contacts, max. switched 30V AC/DC
  • (2) Logic level I/O, >70msec to active
  • External Common
  • External Vin

Internal USB 2.0 interface for firmware updates

  • Power Connector — Coaxial Type A: 5.5mm ID/2.1mm OD, center positive(per IEC 60130-10:1971)
  • Power Requirements — Universal Power Supply, interchangeable worldwide plugs included Input: 100-240VAC @ 0.3A 50/60Hz Output: 5VDC @ 1.2A
  • Power Consumption — 0.75W (5VDC @ 150mA)
  • Dimensions — 4.0” W x 2.25” H x 4.875” D (102mm W x 57mm H x 124mm D)
  • Weight 0.82 lbs (0.37 Kg)
  • Compliance Standards– Safety: CE, ETL/UL/cUL (60950-1)EMC/EMI: FCC Part 15 Class B, EN55022 Class B RoHS Compliant